Your water heater is one of the most used and costly appliances in your home, and consumes a large portion of your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving from the home heating and costs.
Regular flushing of your water heater is considered the single most important step you consider to prolong its service life and to save energy. A duration of time, sediments strengthen in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not just destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most regions of the country, the standard water heater lasts 3-5 years. Regularly flushing your water heater can double lifestyle of your water heater from 3-5 to 7-10 years. Are investigating costs of replacement running from $700 to over $1200 in some cases, getting the most out of your heater is critical in today’s weather. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs in half. Depending on the volume of warm water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.
To drain your water heater, first you should set the thermostat to pilot (if it can be a gas water heater) or turn the circuit breaker off (if it is definitely an electric heater). Failure to do so could result in overheating and severe damage to the heater. Next, close the water supply valve located over the water inlet line going into your water heater. Then you’re connect a garden hose to the drain valve located towards the end of the heater. Open the drain and allow it to run until all of your water has emptied from the unit. Then close the drain. Open the water supply valve and refill the heating. You should also open a hot water faucet somewhere inside the house and stand there and watch it run for several minutes until the water flows out smoothly. This will allow air to vent from the heater and the hot water lines. Finally, you can turn the thermostat in order to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your property to filter or condition the water so it is less corrosive to your plumbing system, particularly in areas which have hard stream. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in your neighborhood to discuss options and products to suit your needs.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX